Esp-32 LoRa Geliştirme Kartı Wifi Kiti 0.96 Inch OLED Ekranlı

Stoktan Hızlı Gönder! Kampanyalı Ürün

Fiyat:1.270,74

Stokta yok

Stok kodu: ESP32-Lora-Oledli Kategoriler:

Açıklama

Açıklamalar:

The 868/915MHz antenna needs to be in connection with the IPEX interface (if the antenna is not connected, the signal reception will be unstable)

Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working. When using, pay attention to the positive and negative of the battery, otherwise it will be damaged!

 

With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin!

Example:

This product is a SX1276 chip based on ESP32 WIFI increased OLED, namely LoRa remote modem, 868-915MHz frequency, high sensitivity is over-148dBm, + 20dBm output power, high reliability, long transmission distance.

the onboard 4Mt bytes (32 Mt bit) wi-fi antenna, 0.96 inch oled display, lithium battery charging circuit, CP2102 interface and USB serial chip, the perfect support for Arduino development environment, can be used for program checking and product development is very easy and fast.
Operating voltage: 3.3V to 7V

Operating temperature range: -40 ° C to + 90 ° C

Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct modes
Data rates: 150 Mbps @ 11n HT40., 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
receiver sensitivity up to -98 dBm
UDP sustained throughput of 135 Mbps

 

Pin diagram

prapazar.com pazaryeri woocommerce entegrasyonu

Test Code:https://github.com/Xinyuan-LilyGo/TTGO-LoRa-Series

İncelemeler

Henüz inceleme yapılmadı.

“Esp-32 LoRa Geliştirme Kartı Wifi Kiti 0.96 Inch OLED Ekranlı” için yorum yapan ilk kişi siz olun

Bu alan güncellenecektir.

Bu alan güncellenecektir.